HDD Tricone Pilot Bit
Matukin jirgitricone bitAna amfani da su ne don hakowa mai shiryarwa a cikin dutsen dutse, yawanci ana amfani da su tare da injin laka da haɗawa da silo, ta yin amfani da curvature na injin laka da kansu ko na musamman ga gajerun hanyoyin haɗin gwiwa don karkata, kuma ana iya raba hakora iri biyu bisa ga haƙoran daban-daban. siffofi, TCI drill bit da Milled hakoritricone bit(karfe), tare da tsohon ya dace da kowane nau'in dutsen dutse, kuma na karshen ya fi dacewa da dutsen mai laushi ko taurin ƙasa.
An jera wasu girman gama-gari da daidaitawa a ƙasa, DrillMore na iya ginawa don dacewa da kowane aiki don haka tuntuɓe mu don neman takamaiman buƙatunku.
| ||||||
| Matakin Buɗe Hole na Pilot zuwa Hole Hole 12 1/4 "zuwa 22" Mai laushi zuwa Matsakaici | ||||||
Diamita na Reamer | Diamita na Pilot Bore | Kashi na uku | ||||
| Min. | Max. | Qty | Girman | IDC | ||
12 1/4" mm 311 | 5 1/2" mm 140 | 6 3/4" mm 171 | 3 | 9" | 4-1-7 | |
14" mm 356 | 7 7/8" 200mm | 8 3/4" mm 222 | 4 | 9" | 4-1-7 | |
16" 406 mm | 9 7/8" mm 251 | 10 5/8" mm 270 | 4 | 9" | 4-1-7 | |
20" mm 508 | 9 7/8" mm 251 | 10 5/8" mm 270 | 4 | 12 1/4" | 4-1-7 | |
22" mm 559 | 12 1/4" 311 mm | 4 | 12 1/4" | 4-1-7 | ||
10" mm 254 | 4 3/4" 121 mm | 6 3/4" mm 171 | 4 | 6 3/4" | 5-4-7 | |
12 1/4" mm 311 | 5 1/2" mm 140 | 6 3/4" mm 171 | 4 | 9" | 5-4-7 | |
14" mm 356 | 7 7/8" 200mm | 8 3/4" mm 222 | 5 | 9" | 5-4-7 | |
16" 406 mm | 9 7/8" mm 251 | 10 5/8" mm 270 | 6 | 9" | 5-4-7 | |
20" 508mm ku | 9 7/8" mm 251 | 10 5/8" mm 270 | 5 | 12 1/4" | 6-2-7 | |
22" mm 559 | 12 1/4" 311 mm | 5 | 12 1/4" | 6-2-7 | ||
Ana amfani da aikin hayewar kwatance sosai a cikin aikin da ba a tonowa ba.
Matakai uku a cikin irin wannan aiki sune:
1>matakin farko shine tono karamin rami na matukin jirgi.
matakin farko shine tono karamin rami na matukin jirgi.
2> Mataki na biyu shine girman rami tare da kayan aikin yankan diamita mafi girma da ake kira HDD Reamer,
Mataki na biyu shine girman rami tare da kayan aikin yankan diamita mafi girma da ake kira HDD Reamer,
Rock Reamer ko Buɗe Hole.
3> Mataki na uku shine shigar da bututun casing ko wani samfur a cikin babban rami.
Mataki na uku shine shigar da bututun casing ko wani samfur a cikin babban rami.
Buɗe rami shine aiki mai wahala a cikin wannan aiki, amma, mabuɗin aikin buɗe rami shine zaɓin mabuɗin ramin bisa ga kayan aiki da samuwar.
Mafi kyawun Sabis na DrillMore:
1.365 * 24 Shekara-zagaye Service, Mun himma zuwa shekara-zagaye 24-hour sabis ko da a lokacin hutu.
2. Ba da sabis na fasaha na ƙwararru, gami da gabatarwar samfuran, zaɓi da warware matsalar da dai sauransu.
3. Babban kaya na nau'ikan nau'ikan yau da kullun, nau'ikan da aka keɓance za a iya isar da su a cikin kwanaki 30.
Yadda ake yin oda?
1. Diamita na mabudin rami
DrillMore Rock Tools
An sadaukar da DrillMore don nasarar abokan cinikinmu ta hanyar samar da raƙuman hakowa ga kowane aikace-aikacen. Muna ba abokan cinikinmu a cikin masana'antar hakowa da yawa zaɓuɓɓuka, idan ba ku sami ɗan abin da kuke nema ba don Allah a tuntuɓi ƙungiyar tallace-tallace ta bin don nemo daidai bit don aikace-aikacenku.
Babban ofishi:XINHUAXI ROAD 999, LUSSONG DISTRICT, ZHUZHOU HUNAN CHINA
Waya: +86 199 7332 5015
Imel: [email protected]
Kira mu yanzu!
Muna nan don taimakawa.
YOUR_EMAIL_ADDRESS
